DC 2000 Nano Dip Coating System
The DC 2000 is a compact laboratory batch coating system designed for the high-precision application of protective coatings and photoresists to substrates via dip coating. The Nano-Coat dip-coating systems are designed for a wide range of ultra-precise applications involving protective coatings from <60 nm to >50 μm with an accuracy of >3%. Since the Nano-Coat dip coating systems are fully air-powered, they can be used with absolute safety with all coatings, including flammable liquids, and for a very wide range of applications.
Features:
- Stainless steel (Type 304) – dip tank and tank rim
- Independently adjustable speeds for immersion and withdrawal movements
- Lifting cylinder and air-over-oil tank
- Guide and immersion drive rod with immersion drive switch for low liquid level
- Stroke reversal valve
- Control panel with:
- Start/stop switch with bypass and pneumatic key switch
- variable speed controls, dwell time timer, pump drive
- Holding device – square or round profile
Options:
- RPS – recirculation pump system for constant coating level control ±0.5 mm
- PDC – Precision depth control – available only with the RPS option
- FX – Exhaust hood and connector for controlling solvent gas release – standard on the DC2002 NANO (without fan)
- AVC – Automatic viscosity control. This provides control with an accuracy better than ±10 mPa
- GIS – Inert Gas System. This enables the injection of argon (Ar) or nitrogen (N) over the coating material in the tank. Note: This requires a minimum distance of 50 mm between the top of the tank and the material inside the tank
- FDS – Flue Gas Detection System
- MF – Microfiltration with bypass, adapted to the material used
- AR – Automatic refilling system for coating material
- LI – Light-isolation package for light-sensitive coating materials
- TTC – Tank Temperature Control
- XY –Xylan® (PTFE) coating for surface treatment
- CT – Stainless steel drip pan with manual retrieval rods for recovering objects that might fall into the tank
- JIG – Fixtures for handling the assemblies to be coated